INVALCO Turbine Meters 

WC3 Series Threaded Cartridge Meter Ideal for general purpose flow measurement, the WC3 cartridge meter has a unique, one-piece cartridge internal that includes tungsten carbide flow-through sleeve bearings to handle the toughest applications. Sizes 3/4" Through 2" Accuracy is Better Than ±0.5% Flow Rates From 3 to 330 GPM Easy-to-Service Precalibrated Cartridge

WC4 Series Flanged Cartridge Meter The WC4 Series flanged meter has the same features and benefits as the WC3 Series threaded meter but includes 316 stainless steel flanges as standard. Sizes 3/4" Through 2" ANSI Flange Ratings From 150# to 600# Accuracy is Better Than ±0.5% Flow Rates From 3 to 330 GPM Easy-to-Service Precalibrated Cartridge

W-3 & W-4 Series Standard Turbine Meters The W-3 and W-4 Series threaded and flanged meters are designed with the typical three-piece rotor and stator assemblies found throughout the industry. This meter series completes INVALCO's large meter product offering with sizes from 3" to 6". 1/2" Meter Size, 1.5 to 6 GPM Available 3" Through 6" Flow Rates From 60 to 3,000 GPM ANSI Flange Ratings From 150# to 2,500# Available Accuracy is Better Than ±0.5%

W-6 Series Grooved Turbine Meter Designed to be compatible with Victaulic® or similar quick connect fittings, the W-6 Series meter includes all the features found in the W-3 and W-4 Series meters. Sizes 1" Through 4" Flow Rates From 6.5 to 1,100 GPM Accuracy is Better Than ±0.5%

W-9 Series Wafer Meter The W-9 Series meter is disigned to be installed between Raised Face ANSI Flanges up to 2,500 lb. This innovative design cuts installed costs and provides easier accessibility. Sizes 3/4" Through 4" Fits ANSI Flange Ratings From 150# to 2,500# Accuracy is Better Than ±0.5% Flow Rates From 3 to 330 GPM Solid 316 Stainless Steel Body

GT3 Series Threaded Gas Meter The GT3 Series gas turbine meter is INVALCO's latest innovation combining the cartridge technology with a unique Tungsten Carbide V-Cup bearing assembly. This design will provide years of service in the toughest applications. Sizes 3/4" Through 2" Accuracy is Better Than ±1.0% Flow Rates From 0.5 to 100 ACFM Pressures From Vacuum to 2,000 PSI Easy-to-Service Precalibrated Cartridge

GT4 Series Flanged Meter The GT4 Series flanged meter has the same features an benefits as the GT3 Series threaded meter but includes 316 stainless steel flanges as standard. Sizes 3/4" Through 2" ANSI Flange Ratings From 150# to 600# Accuracy is Better Than ±1.0% Flow Rates From 0.5 to 100 ACFM Easy-to-Service Precalibrated Cartridge

W-S Series Sanitary Meter Available with Tri-Clover® type end connections and certified by 3A, this W-S Series sanitary meter is suitable for milk, milk products, and other beverage and pharmaceutical applications including deionized water. This meter uses a Rulon® flow-through bearing. Sizes 1/2" Through 3" Accuracy is Better Than ±0.5% Flow Rates From 1.5 to 600 GPM 3A Sanitary Approval

Home | Contact | Product Catalog |

©2007 - 2007 ARM-TEX Corp. All Rights Reserved.

Weco^©, INVALCO^© and Chicksan^© are registered names of FMC Corp.