| 8500
Series "RF" Capacitance Continuous Level Control
|
|
 |
The
8500 Series level control is designed for continuous level
measurement of conductive and nonconductive liquids, granular
materials, slurries, and oil/water interface applicaitons.
- Enhanced
Anti-Coat Capability
- 4-20
mA Output, Field Selectable Direct- or
Reverse-Acting
- Integral
or Remote Mount
- General
Purpose, Heavy-Duty, and Flexible
Probes Available
|
|
| Model
7450 Conductance Level Control |
Designed
for conductive liquids, this level switch is a low cost control
that is easy to install and calibrate.
- Single
or Dual Rigid Electrode
- Flexible
Electrode
- Maximum
Working Pressure 125 PSIG
- Operating
Temperature -20° to 160°F
|
| Model
9450 Leveltronic® Conductance Level Switch |
The
INVALCO 9450 Leveltronic® Control Relay is a conductance level
switch for detecting the level of conductive materials. When
this material comes in contact with the electrode, the elecrode
is "shorted" and establishes a current path to the ground. The
unit responds to the "short" by actuating a relay.
- Sensitivity
250-400K Ohms
- Maximum
Distance From probe 900ft.
- Operating
Temperature -40° to 185°F
|
| 8100
Series "RF" Capactance Point Level Control |
The
8100 Series electronic point level controller is designed to
suit your needs for accurate, reliable, level measurement. Our
patented design makes installation easy and eliminates false
readings and seasonal adjustments.
- Integral
or Remote Mount Units
- 3A
Sanitary Version Available
- Maximum
Working Pressure 600 PSIG
- Operating
Temperature -20° to 160°F
|
| Sanitary
Leveltronic® Conductance Level Control |
The
sanitary leveltronic level control meets 3A Sanitary Standard
37.01 for liquid sensing devices. Excellent performance in foaming
liquids. This unit provides accurate level control of conductive
liquids to less than 0.01".
- Available
With up to Four Probes per Unit
- Maximum
Pressure 250 PSIG
- Operating
Temperature -40° to 185°F
- Sensitivity
Adjustable, 0 to 200K Ohms
|
| Model
IMS 780/783 "RF" Capacitance Interface Measurement
|
This
measurement system is a capacitance-type system offering precise
control of liquid interface level. A non-fouling probe for continuous,
reliable use is standard.
- Sensitivity of ±0.3pf
- Maximum Working Pressure
1,500 PSIG
- Operating Temperature
-20° to 160°F
|
|
